| Size | Dimensions | Price | Quantity | Room Name (Optional) |
|---|---|---|---|---|
|
|
1.1ft x 1.1ft
|
263.06 |
Available for all leading bank's credit cards & HDFC debit cards
Valid for orders above ₹ 5000
Cushion
We provide Cushion covers in standard size only. You can order cushion fillers as an Add On Service.
Wash care: Machine Wash at room temperature, Do not tumble dry, Do not bleach
Assembly: No Assembly required. These are ready cushion covers.
Composition: 100% Polyester
Cushion
Cushions are available in standard sizes of 12X12, 16X16, 18X18 and 16X24.
Ask our design and fabric experts!
Always measure the curtain track or pole width, not the window. If fitting a new track or pole, this should extend 15cm to 30cm either side of the window (to allow the curtains to be stacked back off the window) and 12cm to 15cm above the window recess.
Measure from end to end
If you have a rail with a centre overlap, measure the rail as above then measure the overlap and add the two measurements together.
A + B = Total track width
Measure between the decorative ends - C
Curtains are best hung either to the floor, to a sill or below the sill. We recommend tha curtains finish either: -
A 1cm above the floor
B 15-20cm below the sill (or 2cm above the radiator)
C 1cm above the sill
Always measure in at least 3 positions across the trackor pole as floors and sills are rarely level. To avoid curtains dragging across the floor or sill we recommend you use the shortest of these 3 measurements.
The inner edge of the eyelet is set down 4cm from the top of the curtain. Measure from the top of the pole to where you want the curtains to finish and add 4cm.
40mm eyelets will fit poles up to 30mm in diameter.
50mm eyelets will fit poles up to 35mm in diameter.
66mm eyelets will fit poles up to 50mm in diameter.
When using a curtain track, measure from the top of the track to where the curtain is to finish.
When using a curtain pole, measure from the underside of the decorative ring to where you want the curtain to finish.
Measure the width and the drop in 3 positions, noting any protrusions such as dado rails and tiles.
Make a note of smallest width and drop measurement in mm.
Please choose ‘recess size’ when placing your order and we will make the necessary adjustments to allow the blind to fit the recess.
Allow the blind to extend approximately 50-100mm above and below the window and 50-100mm either side.
Make a note of the required width and drop in mm.
Please quote ‘blind size’ when placing your order. This is the size we will make the blind.
